Hofun Professional Water Test Kit

Hofun Professional 16 in 1 Drinking Water Test Kit may be used for testing drinking water, pool, hot tub, aquarium, spa, pond, etc. Most of the people are satisfied with this product and say that it gives accurate results. However, some people reported inaccuracy in some of the parameters and say that it is hard to read the results.

Features

Hofun Professional 16 in 1 Drinking Water Test Kit features and important details.

• Easy to use.
• The package contains 50 test strips which is enough for 6 months if tested twice a week.
• Can be used for testing drinking water, pool, hot tub, spa, aquarium, etc.

Insightful Reviews

We've curated some of most helpful comments and reviews from people all over the world. Read what they had to say:.

“I have a Master's Degree (MS) in Industrial Chemistry and spent the first part of my career doing Industrial Water Treatment at Paper Mills and Chemical Processing Plants in Alabama, Georgia, and Florida. I performed a test on the water directly from the tap as well as the water after it ran through the Reverse Osmosis Unit. The results told me two things: 1) The Reverse Osmosis Unit is working as expected and 2) this test kit is appreciable accurate. In other words, the results from both were exactly as I expected (and hoped), no surprises. I recommend this test kit. It is easy to use (my granddaughter is interested in science, and I let her do the test along with me and she got the same results) and accurate. I expected the Reverse Osmosis Unit to remove certain things, and the test indicated that it worked as expected. We could see the results showing lower chemicals after the Reverse Osmosis Unit as opposed to the raw tap water.” — Larry

“Bought these strips to test our tap water vs. new reverse osmosis system we installed. The strips are easy to use. Directions state dip strip for 1-2 seconds then hold strip horizontally to tap of excess water so you can get accurate results. Results read within 60 seconds. We followed the steps and were satisfied with the product.” — Jill

“Did not work. I was testing for chlorine in drinking water. Did separate strips for filtered water, tap water and for comparison, plain Clorox bleach. Apparently all have the same chlorine level? Lol. Returning. The strips matched on almost everything (except pH).” — Mike

None